Study Of Concrete Mixture Using Sea Sand With Fresh Water and Sea Water Cure
Abstract
The purpose of this study was to (1) analyze the characteristics of fresh concrete mixed with sea sand (2) to analyze the compressive strength of sea sand concrete with fresh water and sea water curing. In this study, the specimens used were 21 cylinders with a job mix design plan of f'c 25 MPa with a curing duration of 7 days, 14 days, and 28 days. At the age of 7 and 14 days the compressive strength of fresh water curing was 30.29 MPa and 33.12 MPa higher than seawater curing 29.02 MPa and 32.13 MPa, while at 28 days the compressive strength of seawater curing was 37. 08 MPa compared to fresh water curing of 33.97 MPa. Sea sand concrete has a very good quality compared to normal concrete and sea sand can be used in construction projects by taking into account the specifications in accordance with the Indonesian National Standard (SNI).
Downloads
References
He, S., Jiao, C., Niu, Y., & Li, S. (2022). “Utilizing Of Coral/Sea Sand As Aggregates In Environment-Friendly Marine Mortar”: Physical Properties, carbonation resistance and microstructure. Case Studies in Construction Materials, 16(December 2021), e00981. https://doi.org/10.1016/j.cscm.2022.e00981
Hunggurami, E., Utomo, S., & Wadu, A. (2014). “Pengaruh Masa Perawatan (Curing) menggunakan Air Laut terhadap Kuat Tekan dan Absorpsi Beton”. Jurnal Teknik Sipil, 3(2), 103–110.
Hermawan, Okky Hendra. 2018. “Pengaruh Perawatan Terhadap Kuat Tekan Beton. Universitas Pancasakti Tegal”, Jurnal Teknik Sipil, Vol 16(1),1.
Iduwin, T. (2017). “Penggunaan Pasir Laut Terhadap Kuat Tekan Beton”. Jurnal Forum Mekanika, 6(2).
Natarajan, S., Pillai, N. N., & Murugan, S. (2019). “Experimental Investigations On The Properties Of Epoxy-Resin-Bonded Cement Concrete Containing Sea Sand For Use In Unreinforced Concrete Applications”, Materials, 12(4). https://doi.org/10.3390/ma12040645
Prayuda, H., dan Pujianto, A. 2018. “Pengaruh Perawatan (Curing) Perendaman Air Laut dan Air Tawar Terhadap Kuat Tekan Beton”, Universitas Muhammadiyah Yogyakarta, Yogyakarta.
Ramang, R., Sina, D. A. ., & Irpan, M. (2014). “Studi Kelayakan Teknis Penggunaan Pasir Laut Alor Kecil Terhadap Kualitas Beton Yang Dihasilkan”, Teknik Sipil, III(2).
Sharanova, A. V., Tovpinets, A. O., & Dmitrieva, M. A. (2019). “Application Of Sea Sand For 3D Concrete Printing”. IOP Conference Series: Materials Science and Engineering, 597(1), 1–5. https://doi.org/10.1088/1757-899X/597/1/012033
SNI 03-2834-2000. “Tata Cara Pembuatan Rencana Campuran Beton Normal”, ICS 91.100.30, Badan Standardisasi Nasional.
SNI 1974-2011. “Cara Uji Kuat Tekan Beton Dengan Benda Uji Silinder”, Standar nasional Indonesia .
SNI 03-6915-2002. “Tata Cara Mengevaluasi Hasil Uji Kekuatan Beton”, Standar nasional Indonesia.
SNI-2493-2011. “Perawatan Beton”, Standar nasional Indonesia.
SNI ASTM C117:2012. “Bahan Yang Lolos Saringan No.200”, Standar nasional Indonesia
Tjokrodimuljo, 2007. “Teknologi Beton”, Biro penerbit, Yogyakarta.
Wedhanto, S. 2017. “Pengaruh Air Laut Terhadap Kekuatan Tekan Beton Yang Terbuat Dari Berbagai Merk Semen Yang Ada Di Kota Malang”, Jurnal Bangunan, 22(2), 21-30.
Copyright (c) 2023 Febriansyah Arsyad, Irwan Lakawa, Vickky Anggara Ilham, Hakiman Hakiman
This work is licensed under a Creative Commons Attribution 4.0 International License.
